Quote:
Originally Posted by grandpabill
The cars serial number starts with PQ03. I just read another post saying not to take the screws out.....I already did. How do I start fishing for the retainers?
|
Take the cap off of the motor. Go to the hardware store and find a screw that matches one of the ones you removed, but longer. About 2-3 inches long. Use it as your fishing pole. I believe it's an 8-32 screw. Once you get the long one you can screw it into the bearing retainer a little, mount the plate, and use the longer screw to position the plate while you start the small original screw. Once you tighten the original screw, remove the long one and replace it with the other original screw.