View Single Post
Old 03-11-2019, 12:47 PM   #3
sp_clark
Not Yet Wild
 
Join Date: Oct 2009
Posts: 41
Default Re: KF82 valve noise after stuck valve

I did not. I don't think this has hydraulic lifters. I've read they have caps over the end of the valve stem. It literally was running perfect when I shut it off, then wouldn't start the next day and I found the stuck valve. I took the head off and tapped the valve down until it worked loose. I did this with a rubber mallet and didn't have to hit it very hard. Now it makes the loud clacking noise but runs well otherwise.
sp_clark is offline   Reply With Quote