Buggies Gone Wild Golf Cart Forum - View Single Post - Hitting my head on CC roof! Lifting roof suggestions?

sandbag3 · 06-25-2012, 02:28 PM

I was thinking of cutting the A pillars and welding in some square steel to the make the correct elevation. I may be able to just loosen the rear B pillars and rotate it up.

The roof is already at a slight angle to for runoff but only cutting the front may result in too extreme of an roof pitch and will probably have to cut the back ones as well or just put in a filler there.

I was just wondering if anyone out there has done this before I get started...

06-25-2012, 02:28 PM	#8
sandbag3 Not Yet Wild Join Date: May 2012 Location: St. Marks, Florida Posts: 21	Re: Hitting my head on CC roof! Lifting roof suggestions? I was thinking of cutting the A pillars and welding in some square steel to the make the correct elevation. I may be able to just loosen the rear B pillars and rotate it up. The roof is already at a slight angle to for runoff but only cutting the front may result in too extreme of an roof pitch and will probably have to cut the back ones as well or just put in a filler there. I was just wondering if anyone out there has done this before I get started...