Quote:
Originally Posted by CP241
No. The governor monitors cart speed. The governor directly controls the carburetor throttle plate. If you disconnected the rod going from the governor to the carb then the cart isn’t going to run unless you run a cable directly from the pedal to the carb.
On those kf82’s I’d recommend putting the governor and all back together. Those motors really don’t like to rev and bypassing the governor is a nice recipe for a blown up motor.
|
Both of my carts (a 1987 and a 1990) run just fine without the governor rod connected. The governor rod doesn't (fully) control the throttle plate it just...governs it. There is already a cable that runs from the pedal to the carb.