Quote:
Originally Posted by biphase
Pin 10 on the 26 pin plug (white wire) goes high (48 volts) in FWD
Pin 9 on the 26 pin plug (yellow wire) goes high (48 volts) in REV
Your problem sounds like an intermittent connection on the white wire between the F/R switch and pin 10 on the controller.
|
Hi I am having the same issue with my 2008 electric G29, except mine is intermittent in reverse. Once I get going it works fine most the time. If it sits for a while I have to work the throttle and eventually I can get reverse to work. Thinking about ordering a new harness. Can’t find any split wires yet