Re: Planning Engine Swap
Wired up temporarily to make sure it starts and stops
I couldn't get anything to work. Duh, the battery wasn't grounded and the engine ground strap was loose
I ran the red wire coming from the voltage regulator directly to the battery
I connected a yelllow wire to the magneto kill tab to the M tab on the switch
I ran a black wire from the negative battery post to the G tab on the switch
I ran a red wire from the positive battery post to the B tab on the switch
I ran the white wire from the starter solenoid tab to the S tab on the switch
I have the L tab and X tab unused on the switch, that I still need to connect the factory led headlights to the switch
|