Quote:
Originally Posted by yurtle
Electrically, either connection is identical. I'd say, which ever arrangement results in a more solid connection for the 500 amp terminals, use that. If both arrangements are similar, meaning stud length of solenoid is adequate, and/or controller terminal, then I'd route the cables to allow the most flexibility, since the motor "follows" the road, while controller and solenoid follow the frame, over bumps.
I prefer only one cable per solenoid stud, just 'cause. 
EDIT: If your solenoid is the same as mine, don't forget the studs are larger. |
Like I said, just 'cause.
That's the way I wired mine (series), though as you said, "Ironically".