View Single Post
Old 07-19-2019, 12:40 PM   #6
CP241
Nincompoop village idiot
 
CP241's Avatar
Club Car
 
Join Date: Apr 2018
Location: Michigan
Posts: 9,666
Default Re: steeleng 6" lift questions

I believe the kit should have come with a tube of red loc-tite.

When you're adjusting the heim joints, just adjust one of them (lower or upper). A half turn makes a pretty big difference. Mine is set with the top ones showing about 1/4" thread showing, maybe a bit less. I would make my adjustments with the lower ones since you don't have to jack the cart up and remove anything to adjust them.

Unfortunately due to the nature of alignments in general, you have to make an adjustment and then drive it a little so it settles in. Then check it, adjsut more/less if necessary, drive it and check again. It just takes a little patience. Fortunately, there's enough adjustability in the kit to allow it to be corrected with enough time and patience :)
CP241 is offline   Reply With Quote