Because of the hurricane, I don't have internet or power at home. I'm looking up stuff at work and doing tests at night. This is difficult.
I downloaded
this video yesterday and tried to do the tests. Here are my results:
2:25 - limit switch 1 - I had full voltage at both side of the micro switch when I pressed the gas pedal
4:17 - controller posts - the "battery last negative" post passed the test, the "negative out" post increased voltage as the pedal was pushed just like in the video
5:19 - computer bypass - bypassing the computer didn't fix the problem
7:13 - controller current input (terminal 1) - passed this test
7:55 - potentiometer (terminals 2 & 3) - This test confused my. My car has an MCOR1 and I'm not sure if I should get the same ohm readings as the video. I have a spare MCOR that worked the last time it was on the cart. I swapped that in and it didn't fix the problem. I'm assuming I pass this test.
What's my next step?