View Single Post
Old 04-04-2018, 07:29 AM   #6
Philscrimp
Not Yet Wild
 
Join Date: Sep 2017
Posts: 12
Default Re: Yamaha G29 Controller

So, I pulled the connector plug going into the controller to check some of the voltages and I was getting the correct voltage on all of the pins except pin 7. This should be a variable voltage coming from the throttle position sensor as the pedal is pressed. Am I missing something, or if this voltage is not changing as I press the pedal, does that mean that the sensor is bad?

I did all of the checks according to:
http://www.fsip.biz/Documents/FX302_...nstruction.pdf but using the YDRE wiring diagram from the Yamaha web site.
Philscrimp is offline   Reply With Quote