View Single Post
Old 04-02-2018, 09:26 PM   #5
Philscrimp
Not Yet Wild
 
Join Date: Sep 2017
Posts: 12
Default Re: Yamaha G29 Controller

[QUOTE=cgtech;1488947]Dead YDRE controller most often is just that, "dead", no response from cart, no solenoid click, usually no reverse buzzer. Based on your description, I would ask that you report back on which items work correctly, and what the voltage drops to as the pedal

Connected leads across all 4 batteries because the clip would not stay in the charging port. Read around 50.5V. When I pressed the pedal, the voltage didn’t drop, but the buzzer stops and I have to use the tow/run to reset. Video link below shows the process.

I have continuity across tow/run switch, and accelerator switch. I have replaced the batteries and the solenoid. Each battery has 12.5V.

https://www.youtube.com/watch?v=-LBq_UWnvKM
Philscrimp is offline   Reply With Quote