View Single Post
Old 11-25-2018, 07:27 PM   #1
Ransom276
Not Yet Wild
 
Join Date: Nov 2018
Posts: 46
Default 1998 ezgo txt high speed motor

Hey guys I’m knew to the site. Been following a few years now. I hsve a 1998 txt that I completely rebuilt from ground up last year. Well over the past year I have had to replace f/r switches(3) solenoid (3) and controller (1). New motor was installed last year and just found out they sent a high speed motor. It’s a advanced motor and I checked the specs on it and it’s only calls for upgrades 4 awg wire and high amp solenoid. I have since done this and cart runs great. My problem is when there is 3 adults and child on it it gets hot and cuts off. So my question is... is there a controller that will fix this problem or what do I need to do to make it 100 percent reliable. Driven on flat grounds with little to no hills. Also lifted with 23 inch tires and new batteries. Any help is greatly appreciated. Thanks
Ransom276 is offline   Reply With Quote