View Single Post
Old 11-22-2020, 10:05 PM   #7
buggyAl
Getting Wild
 
Join Date: Jul 2019
Posts: 94
Default Re: FE290 Valve Seating 93 CC DS

You really don't need any special tools. I use a 3" piece of rubber hose ( old gas line). With the valve in the head, place one end of the hose over the valve stem and the other end in a cordless drill. Set the drill on the lowest-slowest speed and apply compound. Doesn't take much this way and be careful not to over-do it.
buggyAl is offline   Reply With Quote