Quote:
Originally Posted by AprilG17
We have an electric ezgo series golf cart we are trying to fix up. When we press the gas the solenoid will click but nothing happens. There is 36-38 volts coming from the batteries. Any ideas?
|
First, check and write down pack voltage. With pedal up, check from both sides of Solenoid to main negative. You should always see pack voltage on one side (the input side connected to battery) and less than pack voltage (or ZERO voltage if you do not have resistor on Solenoid) on the other side (output side connected to controller).
Now, press pedal and when solenoid clicks, check voltage from output side of Solenoid to main negative. If this voltage does not change and match pack voltage, your solenoid has failed (even though it may click).
If you get pack voltage on the output side, solenoid is good. If So, post here and someone will help you with step 2.