Next I began working on a test link and make shift tower for my actuator.
The actuator is huge! It can push/pull 2000lbs and hold position up to 4000lbs.
Its fitted with a potentiometer for position feedback. I'm controlling it with a 3 position programmable controller. I'll have 3 preprogrammed positions on 3 dash mounted buttons. Left, Center, and right. I can also manually move the actuator to any position.
During testing I went to far and the tire hit my lower link bar. Luckily this only burned out a fuse. It got me thinking tho and I'll be purchasing a resetable breaker that will be conveniently placed to protect the actuator and the mounts from damage.
Sent from my SM-G960U using Tapatalk