Quote:
Originally Posted by Sergio
It is a Motor issue then, have you tested the motor?
Disconnect the cables from the Motor A1 and A2 posts and check if You have have continuity between the Motor A1 and A2 posts.
|
Hey Sergio, bringing this topic back online as I have a 2007 precedent that was also towed in "run" and stopped running. The controller gave us a HDW Fail Safe fault si I sent for reman with FSIP. Now the resistor in the solenoid was really hot and looked burnt on one side. We received the controller and car did nothing. We did not get any armature faults and called FSIP. After some checks, it needed to be sent back for addtl work. My question is what happens if car is towed in run and will the motor also fail. When we took the reman controller out, the car was not plugged to charger but the resistor and controller were hot. Does this mean anything? Thank you for your help.