Thread: Mikuni vm carb
View Single Post
Old 07-15-2020, 09:36 PM   #8
slonomo
Searching for The Way
 
slonomo's Avatar
Yamaha
 
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,421
Default Re: Mikuni vm carb

Assuming your float is set correctly, I vote for the fuel return line. I installed mine just in front of the carb, and I used the next size smaller fuel line. I used a simple brass tee fitting found at your local NAPA. I think the stock fuel line is 1/4" right? So 3/16" for the return line. I also ran a steel fuel line and threaded it into the top of the plastic fuel tank with some thread sealant. Worked great, no more flooding.
slonomo is offline   Reply With Quote