Well, since no one seems to be sharing, I did mine and I'll share for anyone in the future who may be looking. I cut the wire in about the middle, drilled a hole in the bottom of the FNKS case and ran the wire out through there. Then, I drilled a hole in the body of the cart, ran the wire through that but in front of the battery bucket. Ran the wire in between the body and battery bucket around to the rear and plugged into the alltrax. Spliced the wires back together under the seat, and then used the red 3M double sided mounting tape to attach to the body. Works great, looks clean IMO and is easy to adjust while driving.