View Single Post
Old 02-13-2009, 12:18 AM   #5
MICHAEL
Not Yet Wild
 
Join Date: Feb 2009
Posts: 4
Default Re: vinyl seat adhesive needed.

Thanks guys. The supper 77 will not work in this application. The frame is a narrow abs plastic outer type L system. The thin vinyl cushion just is sitting in this frame and attached with a bead of some kind of adhesive. Almost like a caulk bead. The bead is opaque brown and still stuck to the vinyl seat. it has detached from the abs frame. I need a caulk type of adhesive that will attach itself to vinyl and to hard plastic. I can squeeze in a bead of adhesive in the frame and push the vinyl seat into the bead. hold it in place with weights until it drys. Thats the situation. Any ideas on what type of adhesive type material to use. The frame is not a large flat system. It is a narrow outer perimeter support system. vinyl only has about 1 inch of lip around the outer edge. Thanks again
MICHAEL is offline   Reply With Quote