Re: Solenoid clicks but motor does not engage
But there is a red and white wire that is just left hanging..
The solenoid needs + and - between the 2 small posts to activate and send power to the control. Since the cart ran before you put new batteries in it I suspect you missed something reconnecting the cart to the new pack. The red wire above originally brought (+) to the solenoid activation circuit by way of the F&R ms, key switch,and pedal switch. It may have been replaced with a wire directly from the pack main (+). That's okay too
See attatched is PDS circuit for carts with rocker F&R on the dash
|