Help with f/r problem
I have a custom built 07 pds cart. I had a upgraded motor, solenoid, and a Alltrax 600 installed. The cart ran fine for a day or two, but i noticed when putting it in forward, the back up buzzer would come on softly and then go off. Eventually it came on full blast in reverse and forward. The cart only had reverse after this happened. I reversed the f1 & f2 on the controller and it switched to only having forward.i tried a new diode on the solenoid and cleaned all connections. I was told the controller was bad. I finally ponied-up for another controller. After installing it, the back up buzzer is still full blast in reverse and forward. I did not try moving the cart for fear of toasting the new controller. Any thoughts?
|