Re: EZGO RXV won't release brake after Danaher to Curtis Conversion
Ok I have done this conversion just about a year ago. I'm going by memory and here is how I think it goes.
You needed to find the white wire that ran to the motor brake. You just can't take a guess it has to be the white wire going to the motor brake.
Next you needed to cut this wire my instructions showed where the cut should be. After that you needed to splice together the two end you have now with the white wire coming out of the adaptor harness. The white wire from the harness was about 16" long with nothing attached.
Hope that helps you. But the damaged might have already happened now.
|