Buggies Gone Wild Golf Cart Forum - View Single Post

Rooster59 · 05-13-2019, 04:43 AM

First I installed a 4" or 5" computer cooling fan in the seat cowl to the left of the shifter. It blows fresh air over the clutch and belt where the hot engine air exits the cooling shroud. That pushes hot air rearward. It is rated for about 120cfm.

Then open the rear of the engine cover where it curves down to meet the bag well. If you have a standard cart you could cut some pretty holes or cover the open section with an hvac air return duct grill. I have a metal cargo box so you can't see the open section unless you kneel down at the bag well and look in.

My fan isn't waterproof but I don't hose down the engine compartment.

05-13-2019, 04:43 AM	#2
Rooster59 Gone Wild Join Date: Jul 2017 Location: East Central Missouri Posts: 1,955	Re: Ventilation options after 625 First I installed a 4" or 5" computer cooling fan in the seat cowl to the left of the shifter. It blows fresh air over the clutch and belt where the hot engine air exits the cooling shroud. That pushes hot air rearward. It is rated for about 120cfm. Then open the rear of the engine cover where it curves down to meet the bag well. If you have a standard cart you could cut some pretty holes or cover the open section with an hvac air return duct grill. I have a metal cargo box so you can't see the open section unless you kneel down at the bag well and look in. My fan isn't waterproof but I don't hose down the engine compartment.