Buggies Gone Wild Golf Cart Forum - View Single Post - 1998 ez-go txt gas

trig123 · 04-19-2019, 03:25 PM

Macdoctor
The real name is insulators but I always call them spacers.

They go on the both the 295cc and 350 Pre Mci engines .

The 295 engines came with 25/64th inch thick spacers/insulators.

The 350 engines came with 51/64th inch thick spacers/insulators.

I keep one each here at my shop.

Sometimes people will swap out engines and not see them when they remove the carb. All the engines I have messed with had them on it.

part # for 350 cc engines is 72311-G01
part # for 295 cc is 26637-G01
You could always use the 295 cc carb and change the jet from the 350 cc into it. Hope you get this sorted out. That air box should work on both , if not some here go with the K&N change over.

04-19-2019, 03:25 PM	#5
trig123 Vintage tech Join Date: Sep 2009 Location: South Posts: 3,216	Re: 1998 ez-go txt gas Macdoctor The real name is insulators but I always call them spacers. They go on the both the 295cc and 350 Pre Mci engines . The 295 engines came with 25/64th inch thick spacers/insulators. The 350 engines came with 51/64th inch thick spacers/insulators. I keep one each here at my shop. Sometimes people will swap out engines and not see them when they remove the carb. All the engines I have messed with had them on it. part # for 350 cc engines is 72311-G01 part # for 295 cc is 26637-G01 You could always use the 295 cc carb and change the jet from the 350 cc into it. Hope you get this sorted out. That air box should work on both , if not some here go with the K&N change over.