View Single Post
Old 11-26-2018, 12:54 PM   #3
CP241
Nincompoop village idiot
 
CP241's Avatar
Club Car
 
Join Date: Apr 2018
Location: Michigan
Posts: 9,673
Default Re: No spark EZGO commander

Have you checked to make sure all of your grounds are good? The plate the ignitor is mounted to must see a good ground or you'll have no spark. At least that was the case in my 01 TXT. They tend to accumulate rust between the plate and the floor underneath them. I ran a new ground wire straight from the negative battery terminal to a clean spot on that plate and never had a problem again.

I would also check to make sure the engine block, and chassis so have good solid grounds.
CP241 is offline   Reply With Quote