Buggies Gone Wild Golf Cart Forum - View Single Post

Mancebo · 04-13-2019, 01:02 PM

Yep, didn't have cover in Dcx. Checked all wires. Nothing is loose. Pack is at 38.5. keep in mind, when I connected battery first time, got a series of flashes, guessing four, and solid green. So I'm guessing everything was connected right. Then pressed peddle with hand while cart was in front, and moved an inch forward, tried the same after reverse and an inch back. All was well. The only wire that was a headache was the blue wire going to new solenoid. But figured that out and all was good. Not sure if there is another fuse I'm missing.

Anything I can check without removing everything?

04-13-2019, 01:02 PM	#10
Mancebo Not Yet Wild Join Date: Jul 2014 Location: Indianapolis Posts: 54	Re: EZGO PDS Dcx to Xct controller upgrade Yep, didn't have cover in Dcx. Checked all wires. Nothing is loose. Pack is at 38.5. keep in mind, when I connected battery first time, got a series of flashes, guessing four, and solid green. So I'm guessing everything was connected right. Then pressed peddle with hand while cart was in front, and moved an inch forward, tried the same after reverse and an inch back. All was well. The only wire that was a headache was the blue wire going to new solenoid. But figured that out and all was good. Not sure if there is another fuse I'm missing. Anything I can check without removing everything?