Re: 2002 TXT issue (solenoid?)
If all is correct then with two wires that plug on male terminals of coil connected then your test light will flash when spinning over.
I just pull the wires off enough so they still make contact with coil terminals and stick a test light on it.
There is a black wire with white stripe that comes from ignitor. It has to be grounded. I think my picture showed it. I will show updated picture with wire that needs grounded from ignitor . If not correctly grounded then your test light will not flash.
Check that and post back. I have seen many a time that ground wire come off or not pushed on good enough to make a ground.
|