View Single Post
Old 06-17-2014, 12:58 PM   #4
Spudgunman
Not Yet Wild
Yamaha
 
Join Date: Jun 2014
Location: Northwest USA
Posts: 57
Default Re: Yamaha G29/YDR/Drive Club thread

a specific to this thread governor adjustment is done via the rear inspection panel (the yamaha logo you see looking at the rear of the cart) pull out the plastic rivets and lift up/ snap out the cover. the throttle/governor linkage is right in front of you, a 10mm bolt tightened in about 1 inch will give you about 15mph with factory everything, the cart is rated at 15MPH top speed FYI. (per the aspirated units, not tested with EFI, and obviously not for a electric speed controller)

the use of a ratcheting wrench will be ideal for the adjustment. If you don't want to keep this adjustment permanent you can play with the mechanism to understand how it works and use a simple zip tie to "temporary bypass" the restriction.

if you have a ratcheting wrench you can make the adjustments easily without removing the access cover. Also if you have a rear seat you need to remove it to remove the inspection/access cover.
Spudgunman is offline   Reply With Quote