View Single Post
Old 07-27-2009, 03:27 PM   #4
A.D.
Gone Wild
 
A.D.'s Avatar
 
Join Date: Sep 2008
Posts: 192
Default Re: Can I put 48 volts in a Club Car with V-Glide?

Speaking form experience i ran that same setup 48v on V-glide and resistors, and like Scotty said it will work, but not recommended. I would plan on upgrading in the near future if you go to 48V. The coils got extremely hot, If you do use this setup do not run at less then full throttle for very long. One advantage to your setup is you have a 36v motor and when it is hooked up to 48v it performs very well and add a Controller to it and you will see a little more speed but a lot more torque!!
A.D. is offline   Reply With Quote