Quote:
Originally Posted by NoleFan4Ever
That is usually the sign of a failed controller..... BUT, it has to be powered up and obviously yours may not be yet.
With switch On (or jumped in your position), in Fwd, and pedal depressed; Probe the 2 solenoid small posts and see if you are getting 48vdc?
|
Thank you again for the quick response. So I twisted the blue and green wire to turn the cart on since I don’t have a good key switch. I turned the tow switch to the Run position and placed the other switch in forward.
When I press the gas pedal and probe the solenoids big lugs I get 47.8v. However, when I probe the small posts I do not show any power. It just sits at 0.