E-Z-GO TXT48 2010+ Wiring Diagram
1 Attachment(s)
I wanted to add this to the sticky for wiring diagrams, but the post was closed...
|
Re: E-Z-GO TXT48 2010+ Wiring Diagram
I just posted a thread asking about controller diagnosing for 2010+ txt48 systems
This might help with that. Thanks for posting!!! |
Re: E-Z-GO TXT48 2010+ Wiring Diagram
Personality select? Interesting... Similar to a 1268 except looks like 3 modes.
|
Re: E-Z-GO TXT48 2010+ Wiring Diagram
What is KSI?
I assume the green and orange wires are coming from the F/R switch? |
Re: E-Z-GO TXT48 2010+ Wiring Diagram
Quote:
For example if you set personality to 3 with the handset then setting switches results in: 0,0 - Mode 3 0,1 - Mode 2 1,0 - Mode 3 1,1 - Mode 4 Not sure if those are the exact input results but its something like that. If I recall correctly mode 1 (airport) is not included in the switch input combos. And mode 5 (freedom) is defiantly not included. |
Re: E-Z-GO TXT48 2010+ Wiring Diagram
So I guess you could use it to set a sort of high low speed configuration without needing the hand held.. Airport mode for the kidos and wide open for dad !! Wonder how it would behave if it was set at mode 5 to start with..
|
Re: E-Z-GO TXT48 2010+ Wiring Diagram
No combination of switches will set airport or freedom, so if you wish to include on of those in your personality change it has to be the 'default' set by the handset. However, some of the max speed values can be adjusted for the 3 golf modes so you could put freedom on default then lower the speed if needed on one of the switchable modes.
|
Re: E-Z-GO TXT48 2010+ Wiring Diagram
Quote:
https://www.digikey.com/products/en?keywords=WM3707-ND I'm making up a programming harness to support benchtop programming of the Curtis 1206HB-5201 controller used in the later TXT48 carts. Bob |
Re: E-Z-GO TXT48 2010+ Wiring Diagram
Quote:
|
Re: E-Z-GO TXT48 2010+ Wiring Diagram
1 Attachment(s)
Can someone explain what the SOL+ and the SOL- from controller is???
These wires are not shown in the wiring diagrams I’m guessing they should be the large cables. SOL+ from batteries a SOL- from solenoid to controller B+ Just want to confirm |
All times are GMT -5. The time now is 01:06 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.