Ezgo Fault 52 After COntroller and Motor Upgrade
I installed the Buggies Unlimited High Torque Motor Conversion.
After the install, I have no movement from the machine, and the controller flashes a 52 error code. Any help would be greatly appreciated! |
Re: Ezgo Fault 52 After COntroller and Motor Upgrade
Have you tried calling the supplier? They have a reputation of being "very helpful & responsive" to customer needs.
|
Re: Ezgo Fault 52 After COntroller and Motor Upgrade
As you're new here, you'll quickly find out that BU is a four letter word - in all caps!
You'll probably get help here, but in the future, buy from the site sponsors, and you'll never find a more supportive group of suppliers, even after the warranty is long gone. |
Re: Ezgo Fault 52 After COntroller and Motor Upgrade
Quote:
Just a guy looking for help on the weekend. Even donated to the site to show my appreciation. Sent from my SM-N950U using Tapatalk |
Re: Ezgo Fault 52 After COntroller and Motor Upgrade
What year cart and what drive system?
|
Re: Ezgo Fault 52 After COntroller and Motor Upgrade
Quote:
It is 48 volt. Installed Curtis 500 amp ITS controller Solenoid is a Curtis SW180B. The FNR is mounted behind you legs Let me know if you need any other info. Thank you! |
Re: Ezgo Fault 52 After COntroller and Motor Upgrade
Here are the control unitshttps://uploads.tapatalk-cdn.com/201...4390b26045.jpghttps://uploads.tapatalk-cdn.com/201...8389784daf.jpg
Sent from my SM-N950U using Tapatalk |
Re: Ezgo Fault 52 After COntroller and Motor Upgrade
Is it a 2017 model year cart, or an earlier model year that was refurbished in 2017?
The F/R by your knee indicates an older cart, or at least I am not aware of any recent year carts with a series drive. (The DCS had a sepex drive and a by the knee F/R lever, but that was discontinued in 1999) Does the controller have a label on it? If so, what is the model number? Do you have the original controller and motor? If so, what are the model numbers for them. Have to know what you have in order to help and I haven't been able to figure that out so far. |
Re: Ezgo Fault 52 After COntroller and Motor Upgrade
Just saw the pictures, SepEx drive.
Be back in a bit, got to do some research. |
Re: Ezgo Fault 52 After COntroller and Motor Upgrade
Quote:
Just found cart to be a 2014. Original controller was a: Curtis 1206HB-5201 250A Motor is a: Advanced Motor & Drives Has two part numbers: 624105 And DL9-4006 New Controller is a: Curtis 1268-5509 New Motor: Nidec Drive Systems GC6-4003 New solonoid is Curtis SW180B-1125 |
All times are GMT -5. The time now is 06:47 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.