Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Electric Club Car (https://www.buggiesgonewild.com/forumdisplay.php?f=13)
-   -   Need help with all sport a arm lift. (https://www.buggiesgonewild.com/showthread.php?t=147805)

Hit it like a champ 11-12-2018 02:47 PM

Need help with all sport a arm lift.
 
3 Attachment(s)
Having a hell of a time with this. I pulled the axles and switched brakes from passenger side to drivers side. I cant figure out how Dave stacked the plate above the lift block. Is this the plate i need to cut and stack on top of the lift block. Is my plate different do to there being a Jake’s spindle lift on it. I am thinking i need a different plate for the brake cable mount the one shown in the picture looks different than the one Dave did.

NCPW 11-12-2018 02:58 PM

Re: Need help with all sport a arm lift.
 
That brake cable retainer plate looks different than my stock one. Your's is elongated, mine is more square looking.

P.S. It seems like a start a new thread everyday dealing with the same cart or topic. I suggest keeping everything in the same running thread to make it more organized and easier for other members to reference back to assist you with problems/questions such as this. :thumbup:

TahoeDawgZ71 11-12-2018 02:59 PM

Re: Need help with all sport a arm lift.
 
Your brake cable plates are the new style. You can do it, but you need to order the old style plates. They're cheap.

Hit it like a champ 11-12-2018 03:02 PM

Re: Need help with all sport a arm lift.
 
Ok does anyone know the part number

TahoeDawgZ71 11-12-2018 03:05 PM

Re: Need help with all sport a arm lift.
 
1012181 and 1012182

Hit it like a champ 11-12-2018 03:53 PM

Re: Need help with all sport a arm lift.
 
Quote:

Originally Posted by TahoeDawgZ71 (Post 1559043)
1012181 and 1012182

Thanks ordered

Hit it like a champ 11-12-2018 04:06 PM

Re: Need help with all sport a arm lift.
 
The pin in the spring isn’t going to be long enough is that pressed in can I pound it out or does it have to be drilled out. Or can I just weld the plate to the lift block.

TahoeDawgZ71 11-12-2018 05:41 PM

Re: Need help with all sport a arm lift.
 
Quote:

Originally Posted by Hit it like a champ (Post 1559061)
The pin in the spring isn’t going to be long enough is that pressed in can I pound it out or does it have to be drilled out. Or can I just weld the plate to the lift block.

Read the instructions I posted in the sticky. It tells you to remove the center pin and replace it with a bolt, and double nut it.

Hit it like a champ 11-12-2018 10:14 PM

Re: Need help with all sport a arm lift.
 
Yes I did I can’t remember any instructions on how to remove the pin. Sorry I will figure it out.

big mule 11-12-2018 10:40 PM

Re: Need help with all sport a arm lift.
 
Quote:

Originally Posted by Hit it like a champ (Post 1559196)
Yes I did I can’t remember any instructions on how to remove the pin. Sorry I will figure it out.

I think TahoeDawg is talking about reading here(?) http://www.buggiesgonewild.com/elect...stall-way.html


All times are GMT -5. The time now is 09:16 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.