2014 precedent will not move after intense pressure wash
 

This cart was rigorously cleaned everywhere and looks great but.....

Batteries fully charged and good (tested with a battery load tester)
Battery meter showing full
Tow/Run switch - Run
Keyswitch - on

Forward - buzzer sounds - no movement

Neutral - no buzzer


Reverse - buzzer sounds - no movement


Please guide me where to start

Re: 2014 precedent will not move after intense pressure wash
 

Water in the F&R switch. Pop the switch out of the housing with a screwdriver and remove it. Pay close attention to how it's wired before you disconnect the wires. There are two release tabs at the base of the switch that allow you to take it apart. Take it apart and dry it out and re-assemble it. It'll work. Very common problem.

Re: 2014 precedent will not move after intense pressure wash
 

If you seal the connections while it is apart, that will usually help prevent it again....

Re: 2014 precedent will not move after intense pressure wash
 

Thanks guys! Perfect!