DPI Accusense charger DIP settings
1 Attachment(s)
Greetings,
I recently purchased a DPI Accusense charger. Model : 1-48017-04 MFR MOD : 1RB-48F017E20-E02 S/W: DPI-PE-48F017- A02-02 I have a few questions about the DIP settings. I'm using Trojan T-890's after visiting http://www.dpipower.com/store/index....cal-questions/ I found the correct settings for Trojan T-875's to be, I believe, mode 12 with the DIP's in positions 0 1 0 1 1. Would this be correct for The T-890's too? Is mine set correctly in the attached picture? For setting the DIP's on and off, if 1=down is the DIP next to the printed numbers on the bottom? Does this charger display what mode it is in? It has no LCD display. Should one of the LED's blink 12 times? I have emailed DPI and Golf Cart King, but have not received a response, to be fair it is Saturday and neither list hours for the weekend. I figured someone here would probably have the correct answer. Thanks for your support, Michael |
Re: DPI Accusense charger DIP settings
It looks like the dip switches are correct. When you plug the charger into AC the shutdown and detect should flash for 4 secs.
|
Re: DPI Accusense charger DIP settings
Thanks! I just don't want to burn up a brand new set of batteries.
|
Re: DPI Accusense charger DIP settings
You probably just wouldn't get maximum performance out of them.
|
Re: DPI Accusense charger DIP settings
I know, but it is quite possible to damage the batteries with the wrong algorithm. As I have a have been converting my cart from 4x12v to 6x8v for about a week now I don't want to charge them incorrectly because everybody is off for the weekend. This pack needs to last a for a long time.:-P
|
Re: DPI Accusense charger DIP settings
I would use mode 4. T-890 batteries are Flooded. Mode 12 is for AGM batteries.
|
Re: DPI Accusense charger DIP settings
Quote:
|
Re: DPI Accusense charger DIP settings
from DPI this morning
Quote:
|
Re: DPI Accusense charger DIP settings
First of all, I have a DPI charger and won't consider anything else. But I've got to say that their manuals and tech support really stink.
|
Re: DPI Accusense charger DIP settings
Quote:
So dpi told you their mode 4 is for AGM batteries? That mode 6 (355-425AH) does not seem to make sense for a 190AH battery, but then again those modes don't mean much for individual batteries. |
All times are GMT -5. The time now is 06:22 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.