Yamaha G1 Throttle linkage
Before I take everything apart and break something ...is the throttle linkage (plastic) linkage available? I searched some parts sites but nothing was obvious... I have a lot of free play... are these standard threads? Are the plastic head diameters the same as my old VW? :cry:
|
Re: Yamaha G1 Throttle linkage
these? I think there are different ones though
https://www.ebay.com/itm/YAMAHA-GENU...0AAOSwZ2pcZEpO edit: after digging there are 2 different ones, left thread and right thread. heres the part numbers. 4 total I think J10-14864-01 J10-14833-01 |
Re: Yamaha G1 Throttle linkage
Quote:
Pricey $78 to replaced all 4... I am going another route I may try and use a generic unit if I can find .. |
Re: Yamaha G1 Throttle linkage
You can eliminate all that factory linkage garbage and run the cable straight from the governor to the carb. You'll get better throttle action. If you do this, you'll have to wire the exhaust butterfly open or remove it.
|
All times are GMT -5. The time now is 11:10 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.