|
cant get the inside clutch off
i have got a 2 arm wheel puller heated the pulley and hamered an the thing still wont move,has anyone got any ideas?i already pulled it so hard it chiped the side of the pulley. 1983 g1
|
Re: cant get the inside clutch off
1 Attachment(s)
If you are referring to the inner half of the primary clutch (on the engine) you need to use the proper tool.
(Thanks for the pic, Calvin) |
Re: cant get the inside clutch off
Relevant topics:
http://www.buggiesgonewild.com/gas-y...lutch-off.html http://www.buggiesgonewild.com/gas-y...-come-off.html :thumbup: |
Re: cant get the inside clutch off
4 Attachment(s)
OK, One step at a time:
First pic: Clutch bolt (top), Clutch puller bolt (bottom) Second pic: clutch bolt removed, puller installed. Third pic: If you have the outer part of the clutch removed, it will look like this: (thank you for the pic, Chuddly) Fourth pic: Clutch removed from engine (thanks again Calvin) |
Re: cant get the inside clutch off
man i feel stupid,all this time i thought that was part of the crank shaft and that pulley had to slide off of it,*** thanks everbody,i think i can handle it know if i can find a puller.
|
| All times are GMT -5. The time now is 04:25 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.