Turbocharged Kubota D722 - EZGO
 

Oh c'mon!! Wheres all the oil burners at. :lol:

re: Turbocharged Kubota D722 - EZGO
 

Bueller.... Bueller.....

With that you are showing your age hehe , don't worry im right there with you

re: Turbocharged Kubota D722 - EZGO
 

Heres a few pics of my D722 3 cylinder diesel. I just got through rebuilding it about a month ago. .25mm overbore all brand new Kubota rods, new Kubota crankshaft.....everything Kubota, no aftermarket. The engine had less than 10 hours on it when I got it......someone forgot to check the oil and she chucked a rod...that's how I ended up with it. I put new injectors in and built the injection pump using V1505 pump elements. The stock D722 pump elements are 5mm...the V1505 pump elements are 5.5mm. She needs a turbo or supercharger to utilize the fueling potential...which is coming in time...it will blow smoke something fierce. I broke it in on our engine test stand. We're able to load it hydraulically. I'm just waiting on the weather to turn a little nicer before I put it in.
https://drive.google.com/uc?export=d...EZWSWtGblc4WTg

https://drive.google.com/uc?export=d...EZnX1MwN0lOREE

re: Turbocharged Kubota D722 - EZGO
 

Thats nice, what are you going to put that in

re: Turbocharged Kubota D722 - EZGO
 

EZGO....I don't think it'll fit without major mods in my Club car. I've got a Z482 2 cylinder that will fit better in that.

re: Turbocharged Kubota D722 - EZGO
 

That will be cool in the ezgo. Yeah that is a little big to try and fit in a CC

re: Turbocharged Kubota D722 - EZGO
 

I had a turbo on it but....it was too big. A TD03 from a 2liter kubota....722 just wouldn't spool the turbo. Looking at Either an RHB31 or perhaps an AMR500

re: Turbocharged Kubota D722 - EZGO
 

Its 17 inches long from fan to flywheel...no fan so its a little shorter. Z482 is around 14 fan to flywheel.

re: Turbocharged Kubota D722 - EZGO
 

How tall is that engine sitting on the floor?

It sure looks NICE

re: Turbocharged Kubota D722 - EZGO
 

Specs say 22 inches with the deep pan but I have the shallow pan from a GL11000 genset...probly around 19 or so I'm guessing. The pan accounts for almost 30% of the height. I can get a solid measurement tomorrow. I know the pan is going to stick down but I'm not too worried about it. I can mod the pan or make guards.