Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Electric Club Car (https://www.buggiesgonewild.com/forumdisplay.php?f=13)
-   -   GE magnet replacement (https://www.buggiesgonewild.com/showthread.php?t=80442)

forsanmedic 05-20-2013 09:54 PM

GE magnet replacement
 
The magnet broke off of the washer as I was trying to remove it. Now the washer doesn't seem to want to budge. Does anyone have any hints for getting it off once this happens. I tried a cutting wheel on a dremel, but not enough room. Any suggestions would be appreciated.

smokey tennis shoe 05-20-2013 10:34 PM

Re: GE magnet replacement
 
Same thing happened to me. I went to harbor freight and bought a cheap pair of vise grip ( knock offs) needle nose.

I was able to get that small vise grip right in there and clamp it on , and wiggle it right off.

CartTrader 05-20-2013 11:33 PM

Re: GE magnet replacement
 
2 Attachment(s)
Yes I used a paint can opener. One that has a hook on the end. Slipped that behind the washer and gradually worked it around the washer and it came off. Now I did WD-40 it and let it set for 15 minutes first.

CartTrader

Stevegrmich 05-21-2013 06:15 AM

Re: GE magnet replacement
 
Quote:

Originally Posted by CartTrader (Post 884414)
Yes I used a paint can opener. One that has a hook on the end. Slipped that behind the washer and gradually worked it around the washer and it came off. Now I did WD-40 it and let it set for 15 minutes first.

CartTrader


. . . +1 . . . :thumbup:


All times are GMT -5. The time now is 03:47 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.