Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Electric Club Car (https://www.buggiesgonewild.com/forumdisplay.php?f=13)
-   -   Motor for 600 amp Controller? (https://www.buggiesgonewild.com/showthread.php?t=92549)

someter82 04-12-2014 09:06 PM

Motor for 600 amp Controller?
 
I am looking for a good motor to install on my 2001 Club Car DS 48v. I bought a Alltrax 600 amp Controller and want a good torque motor to install with it. i will be using this cart for hunting and heavy hauling situations. Is there any possible way to get some added speed with this system?

scottyb 04-12-2014 09:19 PM

Re: Motor for 600 amp Controller?
 
Which drive system do you have?

someter82 04-12-2014 09:31 PM

Re: Motor for 600 amp Controller?
 
series drive system

scottyb 04-12-2014 09:41 PM

Re: Motor for 600 amp Controller?
 
D&D makes a hi torque motor that will work well with that control, HD solenoid, HD F&R. and upgraded cables but you won't find anything short of a 2 spd rear end and all the upgrades above to produce massive torque and run 25mph

someter82 04-12-2014 09:46 PM

Re: Motor for 600 amp Controller?
 
i have heard a lot of negatives about D&D motors. any other motor suggestions?

i am planning to install a heavy duty F&R switch, heavy duty solenoid, 2 gauge cable throughout.

are you saying i can install high speed gears to get added speed? or are you saying i wouldnt be possible?

someter82 04-13-2014 07:28 AM

Re: Motor for 600 amp Controller?
 
what results would i have if i went with a Bandit upgrade from Plum Quick?

Swan 04-13-2014 07:44 AM

Re: Motor for 600 amp Controller?
 
your not going to get the torque your looking for out of a bandit . im running a rattlesnake II from PQ with a 700amp mid 30,s and decent torque but its not a hunting cart. it would worth your time and call PQ and tall them what your looking for

InVision 04-13-2014 04:00 PM

Re: Motor for 600 amp Controller?
 
So Swan how does that RS II run. Plenty of torque and fast also? Stock gears? I am thinking of getting a 700 amp controller to use with my PQ Bandit. The next step may be the RS II.

OP - I would not change gears if you are hauling stuff. I would look at the niche motors that have decent torque and RPMs in the 5000s. With 600-700 amp controllers you should have a happy medium.

The PQ Bandit gave me 20-22 mph with stock controller. Hopefully more torque when I add a 500-700 controller. I will let you know sometime soon.

M

Swan 04-13-2014 04:36 PM

Re: Motor for 600 amp Controller?
 
no complaints with the RS II with a 700amp controller it make up the torque loss ( vs. having a 400amp) and still hold nice speed. with 22"/23" wheels its changes to basically a 8:1 gear ratio .

InVision 04-14-2014 05:25 PM

Re: Motor for 600 amp Controller?
 
Swan which Controller are you running on a series CC ?

Thanks,

M


All times are GMT -5. The time now is 07:48 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.