lowering mt txt
I have got some 2" square tubing to use as lowering blocks for the rear of my next build. Does anyone have pics of how they modified the blocks to move the rear axle 3/4" forward. I know it requires a hole drilled in the tubing and also a nub to accept the springs. But is the hole or nub centered in the 5" length of tube and the opposite, nub or hole, 3/4" inch away?
On the other hand, doing the front, I know to swap end front to rear on the springs, but are they flipped over too or are they the same profile as in the stock position? Any pics would be great. Thanks yall. |
Re: lowering mt txt
1 Attachment(s)
Quote:
|
Re: lowering mt txt
Sooooo..2 nubs and no holes. What page did you find that on? Thanks Checkride.
|
Re: lowering mt txt
Quote:
|
All times are GMT -5. The time now is 03:51 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.