removing the crossbar on the swing arm-G9
can you remove that crossbar that goes under the transmission with out wrecking something? id imagine that the crossbar in front of it would keep it together and the axle tubes too. i just want it gone because its the first thing that touches in mud and sand causing it to get stuck pretty easaly. it gets hung up in ruts too.
|
Re: removing the crossbar on the swing arm-G9
I've never done it, but if you do, I would highly recommend a skid plate under the trans.
|
Re: removing the crossbar on the swing arm-G9
It is also the front mount for the diff center section. Might lose some transaxle integrity.
|
Re: removing the crossbar on the swing arm-G9
Quote:
Quote:
|
Re: removing the crossbar on the swing arm-G9
Yamaha put it in there for a reason. I think it wise to leave it, as its the first thing to save the tranny from taking the initial hit.
What Big Guy said, then it will slide over the mud. |
All times are GMT -5. The time now is 07:26 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.