Crossbar to mount sound bar
I’m looking to mount an ecoxgear sound bar off some sort of crossbar connected to the rear roof supports. Just seeing if anyone has fabricated something like this? Thanks.
|
Re: Crossbar to mount sound bar
1 Attachment(s)
One inch square tubing drilled and bolted to front and rear struts. I welded flat stock to the rear one to hang a UTV soft gun case on but the front one has plastic caps that snap in. All sourced at the local steel supplier.
Attachment 224404 |
Re: Crossbar to mount sound bar
Buggyworksfl makes the cross bars.
|
Re: Crossbar to mount sound bar
2 Attachment(s)
For this one (front install) I used 1/4" x 2" flat stock. This is on a DS with a DoubleTake long top. To accommodate the 5 panel mirror and take advantage of the space above due to the curvature of the top, I used a hand sledge to give the crossbar a bit of bend upward. The crossbar is bolted in with the front top struts.
|
Re: Crossbar to mount sound bar
1 Attachment(s)
Attachment 226265
Here is the setup I went with. The crossbar is from buggy works fl. |
Re: Crossbar to mount sound bar
I added the bass speaker to the system from boss. Works better then I thought it would. I have the 8inch speaker.. if you can fit the 10 I would go for it. I use the accessory button on the Ecoxgear to power on the subwoofer.
https://drive.google.com/file/d/1n5S...w?usp=drivesdk |
All times are GMT -5. The time now is 02:18 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.