Brake pads
 

I have been looking for replacement pads for my rear hydraulic calipers to no avail. Caliper kit was purchased from Sunoco a few years ago. Have been trying to contact him with no replies. i have looked through wilwood and other manufacturers, even tried searching the internet through images. Anyone have any ideas it would be appreciated.

Re: Brake pads
 

Though it isnt familiar to me, how about a pic of the caliper and or assembly?


Sent from my iPhone using Tapatalk Pro

Re: Brake pads
 

Here y ago, also caliper casting numbers are 11 on one side and 122 and then a 1 in a circle. Looks like a wilwood # SC1 but the pads for that are too small.

Re: Brake pads
 

https://uploads.tapatalk-cdn.com/201...e2497987a0.jpg


Sent from my iPhone using Tapatalk Pro

Re: Brake pads
 

From what I can tell they are too big. Mine measure 4.04" from end of pad to end of pad. I can't really find full measurements on it. Also my pads have retaining clips. I appreciate you giving me a hand.

Re: Brake pads
 

I have emailed Ausco directly and will update. That way if anyone else had bought these and can't get pads they will have the information.

Re: Brake pads
 

they look very similar to the brake pads on an champion escort motorcycle side car I had a few years ago. I had some trouble finding replacements and I don't recall where I found them, ebay I think.

Re: Brake pads
 

Well Sunoco was logged on 2 days ago so he is still here. Maybe try his website https://www.stealth4x4.com/

Re: Brake pads
 

I've got a local place that makes brakes. Most applications they have ready made replacements, but they can re-line existing backing plates for disc or drum. I'm in northern Indiana, but if you look you might find a similar place closer to you.
www.brakematerialsandparts dot com

Re: Brake pads
 

Thank's. I will give that a look