Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Electric EZGO (https://www.buggiesgonewild.com/forumdisplay.php?f=16)
-   -   87 Ezgo front roof support (https://www.buggiesgonewild.com/showthread.php?t=93976)

tkthorn 05-17-2014 09:04 AM
87 Ezgo front roof support
 
I have an 87 marathon and want to install a windshield. My concern is the roof supports that the windshield mounts to is 41 1/2 wide at the bottom and only 38 3/8" at the top where the bend starts. Should this not be the same width all the way up ?

sportcoupe 05-17-2014 09:49 AM
Re: 87 Ezgo front roof support
 
That is correct, the front roof support is tapered inwards as it goes up, so is a windshield.

tkthorn 05-18-2014 08:58 AM
Re: 87 Ezgo front roof support
 
I got my "86"-up marathon windshield today and it is not tapered. The windshield mearures 41 3/4" all the way up and with my roof support bracket only 38 3/8" wide at the top its not gonna fit. All I know to do would be cut top center and spread and weld in a spacer?

yurtle 05-18-2014 10:32 AM
Re: 87 Ezgo front roof support
 
Quote:
Originally Posted by tkthorn (Post 1029556)
I got my "86"-up marathon windshield today and it is not tapered. The windshield mearures 41 3/4" all the way up and with my roof support bracket only 38 3/8" wide at the top its not gonna fit. All I know to do would be cut top center and spread and weld in a spacer?
A TXT uses a spacer on the narrower portion.


All times are GMT -5. The time now is 06:27 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.