Mikuni 32 mm carb
 

I bought this new to experiment with on my cart. It's a genuine mikuni. I gave it a go for a couple of weeks, but it is simply too much volume for a 2pg. It will include the cable conversion kit for the choke assembly, and 2week old uni foam filter. $85 PayPal shipped.

Re: Mikuni 32 mm carb
 

Hey before you give up on it what kind of cart do you have? Is it a stock motor? I have the exact same carb on my 23 HP Briggs and with a little jet fooling around it flies!!! Way more responsive than the stock Briggs carb and much more top end!!! I can give you my jet sizes if you want. Actually the carb doesnt even open all the way due to the slack in the cable. I dont even care cause its too fast and jumps off the line too fast now!!! Im afraid if I take the slack out my son...........or probably me will be in the hospital toot sweet!!!

Re: Mikuni 32 mm carb
 

I appreciate the advice, but sadly, mine is still only the stock 2pg. It's close, but she just can't pull enough to make it work properly. Thanks though!

Re: Mikuni 32 mm carb
 

For the future try a smaller main jet, to large and fuel dribbles out and engine will be sluggish.

Re: Mikuni 32 mm carb
 

I'd take it for 75 shipped?

Re: Mikuni 32 mm carb
 

Do you need the air filter?

Re: Mikuni 32 mm carb
 

No I just need the carb and cable I have a air filter.

Re: Mikuni 32 mm carb
 

Do you have the rubber boot to manifold piece?

Re: Mikuni 32 mm carb
 

Ok, the filter thing is a long story. I do have the rubber flange connection, you need that also?

Re: Mikuni 32 mm carb
 

Yes I would need the flange assuming it is just like a big rubber hose on both sides or does it have bolt holes on one and open on the other?
Lol Call me it'd be easier 816-805-2047