Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Body and Paint (https://www.buggiesgonewild.com/forumdisplay.php?f=59)
-   -   Prepping for Vinyl Wrap Over Filler (https://www.buggiesgonewild.com/showthread.php?t=173303)

Sethmac 02-06-2021 09:03 AM

Prepping for Vinyl Wrap Over Filler
 
2 Attachment(s)
I have a 2006 Club Car DS. I’m preparing to install 3M vinyl in camo.

I had multiple areas that I filled gouges and predrilled holes with JB Weld Plastic Filler.

I sanded with medium grit and then wet sanded to 1000grit until smooth.

There are flat area and a curved surface where I fixed a crack at the headlight.

Can I wrap over these large bare areas and if not, what other prep should I do? Paint with glossy spray and sand smooth? Clear coat? If I paint do I need to scuff up the smooth areas so paint will adhere?

About ready just to wrap this thing!


All times are GMT -5. The time now is 04:28 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.