85 Marathon coil spring rate?
So I'm looking to replace the rear coils on my cart. I've found quite a few options but I want to know what the stock spring rate is. Does anyone know? The replacement coils have rates from 225 lbs to 300 lbs. Thanks for the help.
|
Re: 85 Marathon coil spring rate?
When I replaced my springs, I was never able to find the stock spring rate. I have a rear seat on my 81 marathon, and went with 450 lb springs that was 10in tall with a 2.5 in inside diameter. I also used spring isolators on the top and bottom to give it a little more height. They work well.
|
Re: 85 Marathon coil spring rate?
So was that a combined rate of 450, so 225 each side?
|
Re: 85 Marathon coil spring rate?
No that was 450 lbs each. I bought them online at Speedway Motors. The part number was 58210450. I tried to post the link, but it will not let me since I'm a new member. You should be able to find them by doing a search of speedway motors and the part number.
|
Re: 85 Marathon coil spring rate?
Quote:
|
Re: 85 Marathon coil spring rate?
orangecart75 your cart weights around 800 lbs. plus your weight? plus who ever rides with you. You have to take that weight in to consideration
|
Re: 85 Marathon coil spring rate?
Quote:
With that said I think you're better off thinking the cart is 300 lbs sprung. This of course is nothing more than a SWAG. Add in your peeps and total up the weight. The front again has leaves but the rear coils will be doing most of the work. I'm thinking you'd be better off with a 250 rate. edit: also, it's worth mentioning that when looking at spring rates the one that is stated (250 lbs for example) means that it takes 250 lbs to compress the spring 1". If the spring compresses 2" then that means you have provided 500 lbs of force. I think we're going overkill on these rates IMO. edit2: last thing I wanted to mention. These coils are the same as a standard coilover spring. 2.5" ID. The Marathon's need a 14" coil in order to do the 4" lift. These coils can be found lots of places especially on offroad websites. Google search "coilover spring exchange" and I think you'll find some places. Maybe even a place owned by a guy named Dave... *wink* *wink* *nudge* *nudge* that has clearance coils from time to time. I found a set for stupid cheap. |
Re: 85 Marathon coil spring rate?
3 Attachment(s)
Alright boys, last post. I got my coils today and here they are...
2.5"ID x 14" x 200lbs You can see the height is 14" (4" over stock) but what you'll notice is that the coil is close to twice as thick! This supports my conclusion that a heavier rated coil isn't needed IMO. |
Re: 85 Marathon coil spring rate?
Dlo63vet is your marathon lifted?
|
Re: 85 Marathon coil spring rate?
:roll:orangecart- so howed it play out?
|
All times are GMT -5. The time now is 03:20 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.