Chargery BMS16 Relay Connections
Looking for someone to clarify if I can wire the HV and LV relays directly to the Chargery BMS? Not 100% sure how the Chargery BMS controls the relay and I don't want to destroy the BMS by connecting it wrong. The diagram shows the black and red wires from he BMS connected directly to the relay. Is this correct?
Cheers :occasion5: |
Re: Chargery BMS16 Relay Connections
The Chargery web site http://www.chargery.com/BMS16.asp shows a connection diagram for a BMS16 and a BMS16-V2.
Which one do you have? |
Re: Chargery BMS16 Relay Connections
I currently have the BMS16. I have looked at the diagrams and they both look to me like they are directly connected. I do notice that MY BMS16 says the output will be pack voltage (48v) where the V2 says it will be 12V.
|
Re: Chargery BMS16 Relay Connections
Quote:
|
Re: Chargery BMS16 Relay Connections
This is what I have
http://www.chargery.com/doc/Chargery...tion_V1.16.pdf I'm not confused about my product just want to make sure I am correctly connecting the relays. The cost of a new BMS is a little more than I want to spend again if i screw it up...if ya know what i mean :thumbup: |
All times are GMT -5. The time now is 11:09 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.