08 EZGO RXV 5th battery for accessories how to install a quick disconnect port?
 

I want to add a 5th dry cell battery for accessories, lights, steroe, video, backup camera and other items. I'm wanting to mount the batter under the drivers side in the spare area and install a quick charging port just like the one the cart uses to charge the 48v system. Does anyone have any suggestions?

Re: 08 EZGO RXV 5th battery for accessories how to install a quick disconnect port?
 

I'm not sure what you mean by "Dry Cell" battery and most dry cell batteries are not rechargeable.

However, if you are talking about a AGM or a gel cell or other type rechargeable 12V battery, I wouldn't use a charging port that is the same as the one used for a 48V system.
Murphy's Law dictates that someone will attach a 48V charger to the 12V battery and explode it. :thumbdown:

Some people use a 12V power port (Lighter outlet) with heavy enough wires to handle the charging current.

Re: 08 EZGO RXV 5th battery for accessories how to install a quick disconnect port?
 

I ordered a power plug off of Ebay for $12. It if fused, marine grade and it lights up when opened. I am picking up a deep cycle battery today and I am going to place it on the driver side of my 08 PDS. I am going to wire my lights, power port to a fuse block with 16 gauge wire and run 10 gauge wire from the batter to the fuse block.

going to pick up a trickle charger with the adapter so I can plug it into my power port to seperately charge the 12volt.

Re: 08 EZGO RXV 5th battery for accessories how to install a quick disconnect port?
 

Thank you for the replies, I'm sorry I dont' know batteries, I want a battery separate from the 48v system and add a permanent charging port just like the one the cart already has (or something similar). One guy mentioned a power plug that lights up, any idea what the name was and how you attached the plug to your charger and the port to your battery? Thank you again